RERA REG NO : K-RERA/PRJ/TSR/134/2024
RERA REG NO : K-RERA/PRJ/TSR/134/2024
Ollur Junction, Thrissur
RERA REG NO : K-RERA/PRJ/TSR/134/2024Ongoing
2 BHK
865 Sq.Ft
605 Sq.Ft
Confident Group chooses a location after thorough research so that the value of land appreciates while your day to day life becomes a breeze.
Enquire Now
Enquire Now
Check out the constant progress of your dream home, we at Confident Group make it a habit to deliver you the latest updates every month.
The overall Strength of a structure such as flexural resistance and abrasion directly depends upon the compressive strength of concrete. Cube test is basically done to know the Compressive Strength of concrete which is the Characteristic strength of a 150mm size concrete cube tested at 7 & 28 days.Concrete gains its strength rapidly till 7th & 14th Days. Then gradually increases from there.
For cube test ,two types of specimensof 15cm X 15cm X 15cm size are used. Concrete is poured in the mould and tempered properly so as not to have any voids. After 24 hours these moulds are removed and test specimens are put in water for curing. These specimens are tested by compression testing machine after 7 days curing or 28 days curing. Load should be applied gradually at the rate of 140 kg/cm2 per minute till the Specimens fails. Load at the failure divided by area of specimen gives the compressive strength of concrete.
Compressive Strength of concrete = Maximum compressive load / Cross Sectional Area.
The obtained strength has to confirm to the standards fixed.
Tensile test is one of the most common tests for steel. The test is described by standards. The test involves straining a test piece by tensile force, generally to fracture, for the purpose of determining various parameters. Tests for determining the tensile strength, yield strength, elongation , degree of bend etc is also done.
The overall Strength of a structure such as flexural resistance and abrasion directly depends upon the compressive strength of concrete. Cube test is basically done to know the Compressive Strength of concrete which is the Characteristic strength of a 150mm size concrete cube tested at 7 & 28 days.Concrete gains its strength rapidly till 7th & 14th Days. Then gradually increases from there.
For cube test ,two types of specimensof 15cm X 15cm X 15cm size are used. Concrete is poured in the mould and tempered properly so as not to have any voids. After 24 hours these moulds are removed and test specimens are put in water for curing. These specimens are tested by compression testing machine after 7 days curing or 28 days curing. Load should be applied gradually at the rate of 140 kg/cm2 per minute till the Specimens fails. Load at the failure divided by area of specimen gives the compressive strength of concrete.
Compressive Strength of concrete = Maximum compressive load / Cross Sectional Area.
The obtained strength has to confirm to the standards fixed.
Tensile test is one of the most common tests for steel. The test is described by standards. The test involves straining a test piece by tensile force, generally to fracture, for the purpose of determining various parameters. Tests for determining the tensile strength, yield strength, elongation , degree of bend etc is also done.
If You Like What You See , Take a Visit to This Property
Book a site visit
